Sika

Sikaflex 2C NS EZMix Base 1.5 Gallon Unit

$45.21
Availability:
In Stock
SKU:
Sikaflex 2C NS EZMix
Sikaflex-2c NS EZ Mix is a 2-component, premium-grade, polyurethane-based, elastomeric sealant
It is principally a chemical cure in a non-sag consistency
Ideal for vertical and horizontal applications
Adding to cart… The item has been added

Product Description

View our Caulking Estimator Calculator to help with your material requirements

A 2-component, polyurethane-based, elastomeric sealant which is a chemical cure in a non-sag consistency. Intended for use in all properly designed working joints with a minimum depth of 1/4". For vertical and horizontal applications, adheres to most surfaces without priming. Advantages: Paintable with water, oil, & rubber based paints; non-Sag is NSF approved for potable water contact. Limitations: 3 day cure & priming required prior to immersion; light color tends to yellow over time due to UV. 

 

Applications: 

  • Intended for use in all properly designed working joints with a minimum depth of ¼ inch.
  • Ideal for vertical and horizontal applications.
  • Placeable at temperatures as low as 40F.
  • Adheres to most substrates commonly found in construction.
  • An effective sealant for use in Exterior Insulation Finish Systems (EIFS).
  • Submerged environments, such as canal and reservoir joints

 

Advantages:

  • Capable of +50% joint movement.
  • Chemical cure allows the sealant to be placed in joints exceeding ½ in. in depth.
  • High elasticity with a tough, durable, flexible consistency.
  • Exceptional cut and tear resistance.
  • Exceptional adhesion to most substrates without priming.
  • Available in 35 architectural colors.
  • Color uniformity assured via Color-pak system.
  • Available in pre-pigmented Limestone Gray (no Color-pak needed).
  • Non-sag even in wide joints.
  • Certified to the NSF/ANSI Standard 61 for potable water.
  • Easy to mix.
  • Paintable with water-, oil-, and rubber-base paints.
  • Jet fuel resistant.
  • Cold weather booster for initial tack
  • Shore A hardness can be increased by using “TG” additive. 
Movement Capability
+50%
Service Temperature
As low as -40°F to 170°F
Use
Vertical and horizontal

Documentation

Contact us for Data and Safety Data Sheet documentation

Related Products