Product Description
Two-component epoxy preparation material for the installation of Ardex underlayments and toppings. Primer for concrete and non-porous substrates such as terrazzo and epoxy coatings. Required primer for decorative applications of Ardex self-leveling toppings. Can be used as crack filling material. Can be used to provide secondary top-down waterproofing Solvent-free, low viscosity, 100% solids epoxy resin. Receives sand broadcast Use for interior and exterior substrates.
Mixing Ratio: Add entire pre-measured contents of Part B (Hardener) into Part A (Resin)
Coverage: The required thickness for the Ardex MC Rapid is dependent on application; see below. Note that application rates are approximate and dependent on concrete surface profile, texture and porosity
| Sand Broadcast required | Minimum Installation Thickness | Approximate application rate per mixed unit: | |
| Underlayments up to 1/4" thick | No | 10 mils / 250 microns | 250-270 ft² |
| Underlayments greater than 1/4" thick | Yes | 14 mils / 350 microns | 170-190 ft² |
| Toppings | Yes | 14 mils / 350 microns | 170-190 ft² |
| Fast-track primer (no moisture mitigation) | Yes | 10 mils / 250 microns | 250-270 ft² |
| Direct installation of floor coverings (no underlayment) | Yes | 10 mils / 250 microns | 250-270 ft² |
| Ardex ACMS | Yes | 14 mils / 350 microns | 170-190 ft² |
Documentation
Contact us for Data and Safety Data Sheet documentation
- Email: customerservice@chasephipps.com
- Phone: 877-946-6668
- Text: 216-641-2150
